E-touring bikes are often ridden at an increased system weight, putting considerable strains on the wheel and its components. This can cause damage to the rim and spokes in the long run. The DT Swiss HU 1900 Spline has been engineered and tested accordingly. Certified for a maximum system weight of 180 kg, this e-bike specific wheel is able to cope with these increased loads: Featuring a thicker cross section and laced with reinforced 2.34 mm spokes, these wheels are built for longevity. The 370 hub rounds up the package with the legendary Ratchet System with 18T. The reliability of the wheel comes from the quality of it's assembly. All wheels are hand-laced by professionally trained wheel-builders, ensuring equal residual spoke tension in every riding situation.Main features: Reinforced rim: Wider rim cross section for a higher rim stiffness enabling a stronger resistance even under big loads. Reinforced spokes: 2.34 mm spoke heads, for enhanced withstanding resistance, even at a high total system weight.Features:General: Weight: 1090 g. Recommended system weight max: 180 kg. ASTM Classification: 2.Rim: Material: aluminum. Rim joint: Pin joint. Tire interface: Hooked / Crotchet tubeless TC. Valve hole: Schrader (plus Presta-adapter). Rim diameter: 29" / 700c. Decal type: Waterslide. Inner width: 25 mm. Outer width: 35 mm. Rim height: 22 mm.Hub: Hub type: 370. Axle system: QR (Quick Release) 5 mm. Built-in dimension: 100 mm. Brake interface: Disc Center Lock.Spokes and nipples: Spokes left: DT hybrid 1. Spokes right: DT hybrid 1. Spoke pattern: Three-cross (1:1). Nipples: DT Prolock Squorx ProHead alu.Inclusive: QR (Quick Release). Tubeless tape 27 mm. 15 mm endcap kit. Valve adapter AV to SV.Reference: WHU1900AEQXSA19164: Front wheel - HU 1900 Spline 29 - 25 mm CL 5/100 mm.
-
